PAT-86 Portable Appliance Tester
The Sonel PAT-80 electrical equipment safety testers are used to test the safety of power tools. With its capabilities, you will test key components of an electrical appliance that are responsible for its safety. The PAT-80 compact meter is a proven tool for measuring the resistance of a protective conductor with a current of 200 mA or the insulation resistance with a voltage of 250 V and 500 V.
The instrument is used wherever safety is paramount. It is ideal for situations where you need to check power tools, three-phase appliances or white goods.
Safety guardian on the post
- Extensive measuring system enables:
- protective conductor resistance measurement using current: 200 mA,
- measurement of insulation resistance using voltage: 250 V and 500 V
- measurement of substitute, differential and touch leakage current,
- functional test,
- test of RCD and PRCD switches,
- ...and much more.
- Intuitive user interface.
- Cooperation with a label printer and QR code scanner.
- Robust, compact housing.
- Operation time at rechargeable battery power supply: up to 1 hour
The device is used wherever safety is the most important thing. Ideally suited to situations where it is necessary to check welders, power tools, three-phase devices and household appliances.
Thanks to the extensive measuring part, the device enables comprehensive checking of electrical devices. The touch screen and autoprocedures section make testing quick and efficient.
The meter cooperates with a label printer and QR scanner, which greatly facilitates the recordkeeping of tools. The following printouts are available:
- initial measurement report,
- QR code, where information on performed tests and the parameters of the tested device are saved.
These data can be read and added to the meter memory using the optional QR code scanner.
The whole picture is complemented by a compact and durable housing. It provides instrument protection during both measurements and transport.
The memory has a tree structure. For each device tested it contains its description, location of measurements, customer data and registration number.
The meter provides many modes of transmission of measurement results: via USB, LAN and WiFi. In addition, it is possible to upload the results to a USB stick. Dedicated PAT Analysis software allows for data management and also reports preparation - in several versions, depending on the user’s needs. In addition, it is possible to use the PAT Server solution. This system allows you to work in many modes, including:
- smooth data management,
- online upload to server,
- work through a web browser,
- work in task ordering mode,
- storing copies of data on the server.
Resistance of protective conductor (PE)
I = 200 mA / 10 A / 25 A
|up to 19.99 Ω||from 1 mΩ||from ±(3% m.v. + 4 digits)|
UISO = 100 V / 250 V / 500 V / 1000 V
|up to 599.9 MΩ||from 1 kΩ||±(5% m.v. + 8 digits)|
|Current (clamp measurement)||up to 24.9 A||from 1 mA||±(5% m.v. + 5 digits)|
|Continuity check of protective conductor (PE)||✓|
|Insulation resistance measurement at three points||✓|
|IEC cable test||✓|
|Apparent power S||up to 3.99 kVA||from 1 VA||±(5% m.v. + 3 digits)|
|Active power P||up to 3.99 kW||from 1 W||±(5% m.v. + 3 digits)|
|Reactive power Q||up to 3.99 kvar||from 1 var||±(5% m.v. + 3 digits)|
|Power Factor (PF)||up to 1.00||0.01||±(10% m.v. + 5 digits)|
|Current consumption for power measurement||up to 15.99 A||0.01 A||±(2% m.v. + 3 digits)|
|THD for voltage and current||up to 99.9%||0.1%||±(5% m.v. + 5 digits)|
|Cosφ||up to 1.0||0.1||±(5% m.v. + 5 digits)|
|Voltage measurement for welding machines|
|RMS voltage URMS||up to 170.0 V||0.1 V||±(2.5% m.v. + 5 digits)|
|DC and AC peak voltage||up to 240.0 V||0.1 V||±(2.5% m.v. + 5 digits)|
|Voltage U0||up to 240.0 V||0.1 V||±(2.5% m.v. + 5 digits)|
|Leakage current measurement|
|Welding circuit leakage current IL||up to 14.99 mA||0.01 mA||±(5% m.v. + 2 digits)|
|Leakage current of the welding machine’s primary circuit IP||up to 14.99 mA||0.01 mA||±(5% m.v. + 5 digits)|
|PE leakage current and differential leakage current||up to 19.9 mA||0.01 mA||±(5% m.v. + 2 digits)|
|Substitute leakage current||up to 19.9 mA||0.01 mA||±(5% m.v. + 2 digits)|
|Touch leakage current||up to 4.999 mA||0.001 mA||±(5% m.v. + 3 digits)|
|RCD and PRCD switch test|
|Measurement of RCD parameters according to IEC 61557||up to 300 ms||1 ms||±(2% m.v. + 2 digits)|
|Measurement of RCD tripping current IA for sinusoidal residual current (AC type)||up to 30 mA||0.1 mA||±5% IΔn|
|Measurement of power network parameters|
|Voltage||up to 265.0 V||0.1 V||±(2% m.v. + 2 digits)|
|Frequency||up to 55.0 Hz||0.1 Hz||±(2% m.v. + 2 digits)|
The information below is required for social login
Create New Account